Home › Learning Resources › Maths › Maths Formulas for Class 10: All Chapters in One Place (with Examples)

Maths Formulas for Class 10: All Chapters in One Place (with Examples)

Every formula from all 14 chapters of Class 10 maths, with solved examples, a searchable formula finder, diagrams and quick calculators for quadratic equations and AP.

Maths 17 November, 2026 15 min read

How to Use This Formula Sheet

This guide follows the 14 chapters of the NCERT/CBSE Class 10 maths syllabus. Each chapter has a formula table and a worked example. Use the formula finder to jump to a chapter or search a formula. Syllabi change, so check your current textbook and board notification.

Class 10 Maths: Marks by Unit (CBSE Theory, Out of 80)Algebra20 marksGeometry15 marksTrigonometry12 marksStatistics and Probability11 marksMensuration10 marksNumber Systems6 marksCoordinate Geometry6 marksCheck the latest CBSE syllabus and sample paper, as the design can change.

Figure 1: Marks by unit in the CBSE theory paper (out of 80). Algebra carries the most marks.

Formula Finder

Pick a Chapter or Search

No formulas match your search.

1. Real Numbers

Unit: Number Systems

ConceptFormula
Euclid's division lemmaa = bq + r, where 0 ≤ r < b
HCF and LCM of two numbersHCF(a, b) × LCM(a, b) = a × b
Fundamental Theorem of ArithmeticEvery composite number = unique product of primes
Terminating decimalp/q terminates if q = 2m × 5n (m, n ≥ 0, p/q in lowest terms)
Irrational numbers√2, √3, √5 and p + q√r type numbers are irrational

Example: For 12 and 18, HCF = 6 and LCM = 36. Check: 6 × 36 = 216 = 12 × 18. ✓

2. Polynomials

Unit: Algebra

ConceptFormula
Quadratic ax² + bx + c: sum of zerosα + β = −b/a
Quadratic: product of zerosαβ = c/a
Cubic ax³ + bx² + cx + dα + β + γ = −b/a; αβ + βγ + γα = c/a; αβγ = −d/a
Quadratic from its zerosx² − (α + β)x + αβ
Division algorithmp(x) = g(x) × q(x) + r(x), degree of r < degree of g

Example: For x² − 5x + 6: sum of zeros = 5, product = 6. The zeros are 2 and 3, and 2 + 3 = 5, 2 × 3 = 6. ✓

3. Pair of Linear Equations in Two Variables

Unit: Algebra

ConceptFormula
Standard forma1x + b1y + c1 = 0 and a2x + b2y + c2 = 0
Unique solution (intersecting lines)a1/a2 ≠ b1/b2
Infinitely many solutions (coincident)a1/a2 = b1/b2 = c1/c2
No solution (parallel lines)a1/a2 = b1/b2 ≠ c1/c2
Cross-multiplicationx = (b1c2 − b2c1) / (a1b2 − a2b1); y = (c1a2 − c2a1) / (a1b2 − a2b1)

Example: Solve 2x + y = 7 and x − y = 2. Adding gives 3x = 9, so x = 3 and y = 1. Since 2/1 ≠ 1/(−1), the lines intersect at one point.

4. Quadratic Equations

Unit: Algebra

Discriminant and the Nature of RootsD > 0Two distinct real rootsD = 0Two equal real rootsD < 0No real rootsRed dots are the roots: where the graph meets the x-axis.

Figure 2: The sign of the discriminant decides how many real roots a quadratic has.

ConceptFormula
Standard formax² + bx + c = 0, a ≠ 0
Quadratic formulax = [−b ± √(b² − 4ac)] / 2a
DiscriminantD = b² − 4ac
Nature of rootsD > 0: two distinct real roots; D = 0: two equal real roots (x = −b/2a); D < 0: no real roots
Sum and product of rootsα + β = −b/a; αβ = c/a

Example 1: x² − 5x + 6 = 0. D = 25 − 24 = 1, so x = (5 ± 1)/2 = 3 or 2.

Example 2: 2x² − 4x + 3 = 0. D = 16 − 24 = −8 < 0, so there are no real roots.

5. Arithmetic Progressions

Unit: Algebra

ConceptFormula
Common differenced = an+1 − an
nth terman = a + (n − 1)d
Sum of first n termsSn = (n/2)[2a + (n − 1)d]
Sum using last term lSn = (n/2)(a + l)
nth term from sumsan = Sn − Sn−1

Example: For 2, 5, 8, ... a = 2, d = 3. Then a10 = 2 + 9 × 3 = 29 and S10 = 5(4 + 27) = 155.

6. Triangles

Unit: Geometry

ConceptFormula
Basic Proportionality Theorem (Thales)If DE ∥ BC in ΔABC, then AD/DB = AE/EC
Similarity criteriaAA, SSS (sides proportional), SAS (one angle equal, including sides proportional)
Ratio of areas of similar trianglesar(ΔABC)/ar(ΔPQR) = (AB/PQ)² = (BC/QR)² = (AC/PR)²
Pythagoras theoremAB² + BC² = AC² (right angle at B); the converse also holds

Example: A triangle with sides 3, 4, 5: 9 + 16 = 25, so it is right-angled. If two similar triangles have sides in the ratio 1 : 2, their areas are in the ratio 1 : 4.

7. Coordinate Geometry

Unit: Coordinate Geometry

ConceptFormula
Distance formulad = √[(x2 − x1)² + (y2 − y1)²]
Distance from the origin√(x² + y²)
Section formula (internal, ratio m1 : m2)[(m1x2 + m2x1)/(m1 + m2), (m1y2 + m2y1)/(m1 + m2)]
Midpoint[(x1 + x2)/2, (y1 + y2)/2]
Area of a triangle½ |x1(y2 − y3) + x2(y3 − y1) + x3(y1 − y2)|
Collinear pointsArea of triangle = 0

Example 1: Distance between (2, 3) and (6, 6) = √(16 + 9) = 5.

Example 2: The point dividing (1, 2) and (4, 5) in the ratio 1 : 2 is ((1×4 + 2×1)/3, (1×5 + 2×2)/3) = (2, 3).

8. Introduction to Trigonometry

Unit: Trigonometry

Trigonometric Ratios in a Right TriangleθP(perp.)B (base)H (hypotenuse)sinθ = P / Hcosθ = B / Htanθ = P / Bcosecθ = H / Psecθ = H / Bcotθ = B / PP, B and H are measured with respect to angle θ.

Figure 3: The six ratios in terms of perpendicular (P), base (B) and hypotenuse (H).

ConceptFormula
Ratiossinθ = P/H, cosθ = B/H, tanθ = P/B, cosecθ = H/P, secθ = H/B, cotθ = B/P
Quotient relationstanθ = sinθ/cosθ; cotθ = cosθ/sinθ
Reciprocalscosecθ = 1/sinθ; secθ = 1/cosθ; cotθ = 1/tanθ
Identity 1sin²θ + cos²θ = 1
Identity 21 + tan²θ = sec²θ
Identity 31 + cot²θ = cosec²θ
Complementary anglessin(90° − θ) = cosθ; cos(90° − θ) = sinθ; tan(90° − θ) = cotθ; cot(90° − θ) = tanθ; sec(90° − θ) = cosecθ; cosec(90° − θ) = secθ

Trigonometric Ratios of Standard Angles

θ0°30°45°60°90°
sinθ01/21/√2√3/21
cosθ1√3/21/√21/20
tanθ01/√31√3not defined
cosecθnot defined2√22/√31
secθ12/√3√22not defined
cotθnot defined√311/√30

Example: If sinθ = 3/5, then cosθ = √(1 − 9/25) = 4/5 and tanθ = 3/4.

9. Some Applications of Trigonometry

Unit: Trigonometry

ConceptFormula
Height from distanceheight = distance × tanθ
Length of ladder or stringlength = height / sinθ
Angle of elevation / depressionMeasured from the horizontal line of sight; the two angles are equal (alternate angles)
Two angles of elevationForm two right triangles and use tanθ in each, equating the common height

Example: The angle of elevation of the top of a tower from a point 20 m away is 60°. Height = 20 tan 60° = 20√3 ≈ 34.64 m.

10. Circles

Unit: Geometry

ConceptFormula
Tangent and radiusA tangent is perpendicular to the radius at the point of contact
Tangents from an external pointThe two tangent lengths are equal
Length of tangent√(d² − r²), where d is the distance from the centre
Number of tangents2 from an external point, 1 at a point on the circle, 0 from an inside point

Example: A point is 13 cm from the centre of a circle of radius 5 cm. Tangent length = √(169 − 25) = 12 cm.

11. Areas Related to Circles

Unit: Mensuration

ConceptFormula
Circumference2πr
Area of a circleπr²
Length of an arc(θ/360) × 2πr
Area of a sector(θ/360) × πr²
Area of a segmentArea of sector − area of triangle
Area of a ring (annulus)π(R² − r²)
Sector, Arc and Segment of a CircleθrrarcOCircumference= 2πrArea of circle= πr²Arc length= (θ/360) × 2πrSector area= (θ/360) × πr²Segment area= sector − triangleθ is the angle of the sector at the centre, in degrees.

Figure 4: Arc, sector and segment of a circle.

Example: For r = 7 cm and θ = 90° (using π = 22/7): arc length = (1/4) × 2 × (22/7) × 7 = 11 cm, and sector area = (1/4) × (22/7) × 49 = 38.5 cm².

12. Surface Areas and Volumes

Unit: Mensuration

ConceptFormula
CuboidV = lbh; TSA = 2(lb + bh + hl); LSA = 2h(l + b); diagonal = √(l² + b² + h²)
CubeV = a³; TSA = 6a²; LSA = 4a²; diagonal = √3 a
CylinderV = πr²h; CSA = 2πrh; TSA = 2πr(r + h)
ConeV = (1/3)πr²h; l = √(r² + h²); CSA = πrl; TSA = πr(l + r)
SphereV = (4/3)πr³; SA = 4πr²
HemisphereV = (2/3)πr³; CSA = 2πr²; TSA = 3πr²
Frustum of a coneV = (1/3)πh(r1² + r2² + r1r2); l = √[h² + (r1 − r2)²]; CSA = πl(r1 + r2); TSA = πl(r1 + r2) + πr1² + πr2²
Combination of solidsAdd volumes; for surface area add only the exposed surfaces
Conversion of solidsVolume stays the same when a solid is melted and recast
Volume and Surface Area at a GlanceCylinderV = πr²hTSA = 2πr(r+h)ConeV = ⅓πr²hTSA = πr(l+r)SphereV = ⅔πr³SA = 4πr²HemisphereV = ⅔πr³TSA = 3πr²CuboidV = lbhTSA = 2(lb+bh+hl)Cone slant height: l = √(r² + h²). CSA means curved surface area, TSA total surface area.

Figure 5: Key volume and surface area formulas.

Example 1: A cylinder with r = 7 cm and h = 10 cm (π = 22/7): V = (22/7) × 49 × 10 = 1540 cm³ and TSA = 2 × (22/7) × 7 × 17 = 748 cm².

Example 2: A cone with r = 3 cm and h = 4 cm has l = 5 cm and CSA = π × 3 × 5 = 15π ≈ 47.1 cm².

13. Statistics

Unit: Statistics & Probability

ConceptFormula
Mean (direct method)x̄ = Σfixi / Σfi
Assumed mean methodx̄ = a + Σfidi / Σfi, where di = xi − a
Step-deviation methodx̄ = a + h × Σfiui / Σfi, where ui = (xi − a)/h
Median (grouped data)l + [(n/2 − cf) / f] × h
Mode (grouped data)l + [(f1 − f0) / (2f1 − f0 − f2)] × h
Empirical relation3 Median = Mode + 2 Mean
Class mark(upper limit + lower limit)/2

Example (mode): Modal class 20–30 with l = 20, f1 = 15, f0 = 10, f2 = 5, h = 10. Mode = 20 + [5 / (30 − 10 − 5)] × 10 = 20 + 3.33 = 23.33.

14. Probability

Unit: Statistics & Probability

ConceptFormula
Probability of an eventP(E) = Number of favourable outcomes / Total number of outcomes
Range0 ≤ P(E) ≤ 1; sure event = 1; impossible event = 0
Complementary eventsP(E) + P(not E) = 1
All elementary eventsSum of their probabilities = 1
Useful countsOne die: 6 outcomes; two dice: 36; one coin: 2; two coins: 4; three coins: 8; deck: 52 cards (26 red, 4 suits of 13, 12 face cards)

Example: Two dice are thrown. The sum 8 occurs for (2,6), (3,5), (4,4), (5,3), (6,2), so P = 5/36.

Quick Calculators

Quadratic Equation Solver

-discriminant D
-nature of roots
-roots

Arithmetic Progression Calculator

-nth term an
-sum Sn

How to Remember and Practise Formulas

  • Group by chapter: keep one page of formulas per chapter.
  • Derive, do not just memorise: knowing where a formula comes from helps recall.
  • Use flashcards for trigonometric values and identities.
  • Practise daily: solve at least five questions using each formula.
  • Revise weekly: write all formulas from memory and check against this sheet.
  • Check units: area in square units, volume in cubic units.

Syllabus Note

The rationalised NCERT syllabus has 14 chapters and does not include Constructions. If your school or board follows a different or updated syllabus, follow that.

Quick Revision: Top Formulas

ChapterMust-know formula
Quadratic Equationsx = [−b ± √(b² − 4ac)] / 2a
Arithmetic Progressionsan = a + (n − 1)d
Coordinate Geometryd = √[(x2 − x1)² + (y2 − y1)²]
Trigonometrysin²θ + cos²θ = 1
Surface Areas and VolumesCylinder V = πr²h
StatisticsMode = l + [(f1 − f0)/(2f1 − f0 − f2)] × h
ProbabilityP(E) = favourable / total

Frequently Asked Questions (FAQ)

The key Class 10 formulas include the quadratic formula and discriminant, the nth term and sum of an AP, the distance and section formulas, trigonometric ratios and identities, circle and sector formulas, surface area and volume formulas, the mean, median and mode formulas, and the probability formula. This page lists all of them chapter by chapter with worked examples.

The NCERT Class 10 maths syllabus used in recent years has 14 chapters: Real Numbers, Polynomials, Pair of Linear Equations in Two Variables, Quadratic Equations, Arithmetic Progressions, Triangles, Coordinate Geometry, Introduction to Trigonometry, Some Applications of Trigonometry, Circles, Areas Related to Circles, Surface Areas and Volumes, Statistics and Probability. Check your current textbook and board syllabus for any change.

For ax squared plus bx plus c equals 0, the roots are x = [-b plus or minus the square root of (b squared minus 4ac)] divided by 2a. The discriminant b squared minus 4ac tells you the nature of the roots: two distinct real roots if positive, equal real roots if zero and no real roots if negative.

The core ones are sin = perpendicular/hypotenuse, cos = base/hypotenuse and tan = perpendicular/base, the identities sin squared plus cos squared equals 1, 1 plus tan squared equals sec squared and 1 plus cot squared equals cosec squared, the complementary angle relations and the values of the ratios at 0, 30, 45, 60 and 90 degrees.

Cylinder: volume pi r squared h, CSA 2 pi r h, TSA 2 pi r (r + h). Cone: volume one-third pi r squared h, CSA pi r l, TSA pi r (l + r). Sphere: volume four-thirds pi r cubed, surface area 4 pi r squared. Hemisphere: volume two-thirds pi r cubed, TSA 3 pi r squared. Cuboid and cube formulas and the frustum formulas are listed in the Surface Areas and Volumes section.

For grouped data, mean = sum of f times x divided by sum of f (or use the assumed mean or step-deviation method), median = l + [(n/2 - cf)/f] times h and mode = l + [(f1 - f0)/(2f1 - f0 - f2)] times h. They are related by 3 Median = Mode + 2 Mean.

In the CBSE theory paper, Algebra carries the most marks (about 20 of 80), followed by Geometry, Trigonometry, Statistics and Probability, Mensuration, Number Systems and Coordinate Geometry. Marks distribution can change, so check the latest CBSE sample paper and syllabus.

Group formulas by chapter, write them from memory each week, and use each one in at least five questions. Make a one-page formula sheet per chapter, use flashcards for trigonometric values and identities, and revise using a mix of old and new questions.

Boards generally expect students to remember formulas and do not allow a personal formula sheet. Always check the current rules of your board or exam centre.

The distance between (x1, y1) and (x2, y2) is the square root of [(x2 - x1) squared + (y2 - y1) squared]. The internal section formula for ratio m1 : m2 gives the point [(m1 x2 + m2 x1)/(m1 + m2), (m1 y2 + m2 y1)/(m1 + m2)].

The sum of the first n terms is S = (n/2)[2a + (n - 1)d], where a is the first term and d the common difference. If the last term l is known, S = (n/2)(a + l). The nth term is a + (n - 1)d.

In the rationalised NCERT syllabus used in recent years, the Constructions chapter was removed, leaving 14 chapters. Syllabi are revised from time to time, so check your current textbook and board notification.