25 working model ideas for Classes 6 to 12, grouped by theme, with materials, how each model works, a build plan, judging tips and safety rules for your next school science exhibition.
A good science exhibition project is more than a pretty model. It explains an idea, works in front of the judges and connects to everyday life. Use these tests when choosing:
Figure 1: The 25 working models grouped into five themes.
Filter by theme and class level. Difficulty is shown on each card.
Principle: Solar energy and the greenhouse effect
Materials: Cardboard box, aluminium foil, glass sheet, black paint, newspaper
How it works: A foil-lined reflector focuses sunlight into a black-painted insulated box under glass. The trapped heat warms water or heats a snack.
Principle: Wind energy and electromagnetic induction
Materials: Small DC motor, plastic bottle blades, LED, wires, wooden stand
How it works: Wind turns the blades, spinning a motor as a generator that produces enough current to glow an LED.
Principle: Potential energy to electrical energy
Materials: Plastic tray, water bottle, small water wheel, mini dynamo or motor, LED
How it works: Water falls from a raised bottle onto a wheel connected to a generator, lighting a bulb to show how dams make electricity.
Principle: Anaerobic decomposition of organic waste
Materials: Two plastic containers, tubing, balloon, cow-dung or kitchen waste slurry
How it works: Organic waste ferments in a sealed chamber. A balloon collects the gas to show how biogas can be captured. Keep it sealed and outdoors or well ventilated.
Principle: Photovoltaic effect
Materials: Small solar panel, DC motor, wheels, chassis from cardboard or a kit
How it works: The solar panel feeds the motor directly so the car moves in sunlight and slows in shade.
Principle: Force on a current-carrying conductor
Materials: Copper wire coil, battery, magnet, paper clips
How it works: A coil on supports between a magnet spins when current flows, showing how electricity can produce motion.
Principle: Water conservation and groundwater recharge
Materials: Thermocol house model, roof, pipe, storage tank, sand-gravel pit
How it works: Rain from the model roof flows through a pipe into a storage tank and a recharge pit, showing how buildings save water.
Principle: Filtration of suspended impurities
Materials: Cut plastic bottle, cotton, fine sand, activated charcoal, gravel, beaker
How it works: Muddy water passes through layered filters and comes out clearer. The water is still not safe to drink without treatment.
Principle: Heat trapping by gases
Materials: Two clear containers, thermometers, a lamp or sunlight, plastic wrap
How it works: A covered container warms more than an open one under the same light, showing how trapped heat raises temperature.
Principle: Waste management and recycling
Materials: Coloured bins, cardboard city, small compost box, labels
How it works: A mini city shows wet, dry and hazardous waste bins and a compost pit that turns kitchen waste into manure.
Principle: Role of plants in holding soil
Materials: Two trays with soil slopes, grass or seedlings, watering can
How it works: Water poured on a bare slope washes soil away, while the planted slope holds it, showing why trees matter.
Principle: Light-dependent resistor as a sensor
Materials: LDR, transistor, resistors, LED, battery, breadboard
How it works: In darkness the LDR resistance rises and switches the LED on; in daylight it switches off.
Principle: Water as a conductor
Materials: Buzzer, transistor, battery, two wire probes on a small board
How it works: When raindrops bridge the probes, current flows and the buzzer sounds.
Principle: Open and closed circuits
Materials: Buzzer, battery, reed or push switch, magnet, wires
How it works: Opening the door breaks or makes a circuit and the buzzer rings, showing how security alarms work.
Principle: Temperature-sensitive resistor
Materials: Thermistor, transistor, buzzer, battery, resistors
How it works: A rise in temperature changes the thermistor resistance and triggers the buzzer. Demonstrate with a warm cup, not real fire.
Principle: Ultrasonic sensing and servo control
Materials: Arduino, ultrasonic sensor, servo motor, battery, dustbin
How it works: When a hand comes near, the sensor detects it and the servo opens the lid, then closes it after a delay.
Principle: Pascal's law
Materials: Two syringes of different size, tube, water, wooden platform
How it works: Pushing the small syringe moves liquid to the large one, which lifts a load, showing force multiplication.
Principle: Electromagnetism
Materials: Iron nail, insulated copper wire, battery, switch, paper clips
How it works: Current through a coil around the nail makes it a magnet that picks up clips and drops them when switched off.
Principle: Reflection of light
Materials: Cardboard tube or box, two plane mirrors, tape
How it works: Two parallel mirrors at 45 degrees let you see over a wall by reflecting light twice.
Principle: Conservation of momentum and energy
Materials: Five steel balls or marbles, string, wooden frame
How it works: Lifting and releasing one ball sends the motion through the line so the last ball swings out.
Principle: Inertia and earthquake detection
Materials: Heavy weight, spring, pen, paper roll, frame
How it works: Ground shaking moves the frame while the hanging weight stays still, so the pen draws a wavy line on paper.
Principle: Breathing and diaphragm movement
Materials: Plastic bottle, balloons, Y-shaped tube, rubber sheet
How it works: Pulling the rubber sheet down inflates the balloon lungs, and pushing it up deflates them.
Principle: Blood circulation
Materials: Two bottles, tubes, one-way valves, coloured water, pump bulb
How it works: A squeeze bulb and valves push coloured water in one direction, like the heart pumping blood.
Principle: Digestion and absorption
Materials: Clay or thermocol parts, tubes, labels, chart
How it works: A labelled model traces food from mouth to intestine and shows what each organ does.
Principle: Image formation and the eye
Materials: Box, black paper, pin, butter paper, convex lens
How it works: Light through a pinhole forms an inverted image, which helps explain how the eye forms images on the retina.
| Class | Easy working models |
|---|---|
| 6-8 | Solar cooker, hydraulic lift, periscope, electromagnetic crane, rainwater harvesting, water filter, lung model, rain alarm |
| 9-10 | Wind turbine, hydro dam, biogas plant, solar car, greenhouse model, Newton's cradle, burglar alarm |
| 11-12 | Fire alarm with thermistor, Arduino smart dustbin, sensor-based energy or environment models |
Figure 2: A four-week plan from idea to presentation.
Figure 3: Pushing the small syringe pressurises the liquid, which raises the load on the large syringe (Pascal's law).
Pressure applied to a liquid in a closed system passes equally in all directions. The larger piston has more area, so the same pressure produces a larger force, which lifts a heavier load while moving a shorter distance.
A bigger output piston gives a bigger output force.
Figure 4: Layers of fine sand, charcoal and gravel remove suspended dirt. Filtered water still needs proper treatment before drinking.
A simple model filter only clears visible dirt. Do not drink water from the model, and say clearly in your presentation that real drinking water also needs disinfection.
Figure 5: Common judging criteria. Weights vary by event.
Title, aim, principle, materials, labelled diagram, working, observations, uses, precautions, conclusion and references.
| Step | Tip |
|---|---|
| Choose | One principle, working model, real-life link |
| Build | Prototype first, test, improve |
| Present | Problem, principle, demo, results, uses |
| Stay safe | Low voltage, no flames, adult help |
A science exhibition project is a working model, display or demonstration that explains a scientific idea, shown at a school or district science exhibition. Judges look at how well the model works, how original it is and how clearly you explain the science behind it.
Good ideas combine a clear scientific principle with a model that visibly works, such as a solar cooker, hydraulic lift, rainwater harvesting model, wind turbine, water filter or automatic street light. This guide lists 25 working models for Classes 6 to 12 grouped by theme.
Easy options include the solar cooker, hydraulic lift with syringes, periscope, electromagnetic crane, rainwater harvesting model, sand-charcoal water filter, human lung model and rain alarm. They use low-cost materials and demonstrate one clear idea.
Class 9 and 10 students can try the wind turbine, hydroelectric dam, biogas plant, solar car, greenhouse effect model, Newton's cradle, seismograph, burglar alarm and heart pump model. These involve a little more design and testing.
Higher classes can attempt sensor-based and microcontroller projects such as a smart dustbin with Arduino or a thermistor fire alarm, along with more detailed versions of energy and environment models with measured results.
Pick a topic you understand and are interested in, check that you can build a working model with the time and budget you have, link it to a real-life problem, and make sure you can explain the principle in simple words. Avoid copying a model you cannot explain.
Simple models can be built in a weekend, while sensor-based projects usually need two to four weeks including testing. Start early, leave time to fix problems and rehearse your explanation.
Typical criteria include a working model, originality, a clear scientific explanation, practical or social relevance, presentation and confidence, neatness and safety. Check your school's own rubric because the weights vary.
Start with the problem, then name the scientific principle, demonstrate the model, explain what each part does and end with real-life uses and limits. Practise a two-minute talk and be ready for questions.
Many models can be made with household and recycled materials for little money, while electronics projects need parts such as sensors, a battery or a microcontroller. Plan a materials list and budget before you start.
Include the title, aim, principle, materials, diagram, working, observations or results, uses, precautions and conclusion, plus a short list of references. Keep it neat and label diagrams clearly.
Use low-voltage batteries instead of mains electricity, avoid open flames and hazardous chemicals, wear protective gear for cutting or soldering, and have an adult supervise tools and heat. Keep the display stable and tidy.